Announcement

Collapse
No announcement yet.

How to guide : Use Mgcamd with CCcam and Newcs

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • How to guide : Use Mgcamd with CCcam and Newcs

    How to guide: Use Mgcamd with CCcam and Newcs

    '' This guide shows how to use MgcamD with CCCAM & NewCS. Covers setup and adding C and N lines. The examples shows a Azbox but this guide will work on other Enigma & Enigma 2 based linux satellite receivers (Dreambox Dm500S, Eagle Box, Vu+, Azbox, Spiderbox etc.).

    This is some information about how to add C & N lines to mgcamd.
    This particular post will refer to its use for the Azbox, but can be adopted to use with other receivers using Enigma and Enigma2.
    The location of the files will depend on the image you use.
    In linux they will be in /var/keys or /usr/keys or something similar.
    For the Azbox, all files will be found in the folder /PLUGINS/OpenXCAS/mgcamd which makes things extremely simple and is why I selected that receiver.

    mg_cfg
    cccamd.list
    and
    newcamd.list


    To allow mgcamd to share from both CCcam and Newcs, you must ensure that in the file mg_cfg, you edit the settings for the value of G: { x }

    Settings are cumulative, you sum the values of the emus you want to connect to.. Have a quick look, but donít dwell on it.

    Set G: { 33 }

    Simple so far? it gets easier..

    Edit cccamd.list and paste in a C-line as normal e.g.

    C: myfriend.dyndns.com 12000 myname mypass

    close and save.

    Edit newcamd.list

    You may see something like:

    CWS_KEEPALIVE = 300
    CWS_INCOMING_PORT = 21000


    leave that alone..

    If someone gives you an N-line like this:

    N: cs-allocccam.com.dyndns.com 15000 myname mypass 01 02 03 04 05 06 07 08 09 10 11 12 13 14

    add it to the end of the newcamd.list like this:

    CWS = cs-allocccam.com.dyndns.com 15000 myname mypass 01 02 03 04 05 06 07 08 09 10 11 12 13 14 server1



    Close and save

    Restart mgcamd.

    You can now connect to the servers, with the added bonus for the Azbox of being able to download the mgcamd keys directly from our server and have Bulsat etc.
    working as well.

    Have Fun !!

  • #2
    use this guide for Dreambox Dm500S, Eagle Box, Vu+, Azbox, Spiderbox etc.

    Comment

    Working...
    X