Announcement

Collapse
No announcement yet.

guide for setting up non usals for dm800

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • [GUIDE] guide for setting up non usals for dm800

    STAGE 1.
    Setting up a DM800 none usals
    GOTO Main Menu \ Setup \ Service Searching \ Tuning
    Press "OK" on "TUNER A"



    Use L/R keys to change Configuration Mode to "advanced"
    Move down to "SATELLITE"
    Use L/R keys to select the satellite you want to add



    Go down to "LNB"
    Use L/R keys to select "LNB 1"
    Next ensure "Diseqc Mode" is " 1.2"
    (I left the others at the default setting's)
    Scroll further down to "LOF" and set it to "Universal LNB" using the L/R keys



    Underneath that set "Use USALS" for this satellite to "no" using L/R keys
    Go down to "Stored position"
    Set the position you want to for this satellite to appear at using L/R keys ie 001, 002 etc and press ok
    Then Press "OK" to save the info you have inputted.
    You will need to perform this for each Satellite position you intend to set up. Before you got to positioner setup.

    STAGE 2.
    GOTO back to Main Menu \ Setup \ Service Searching \ Positioner Satfinder
    Go down to "Satfinder"



    Press ok on Satfinder next picture



    Using L/R keys select "Predefined or Manual transponder" as required
    Go down to "Satellite" and use the L/R keys to select the Satellite to place at the above Storage postion
    Press "OK"
    When you have a lock exit this screen

    GOTO back to Main Menu \ Setup \ Service Searching \ Positioner setup



    Press ok on positioner setup next picture
    Go up to "Tune"
    Press the "Red Button"
    Select the satellite that you had a lock on, change the transponder so it was the same as in the satfinder picture

  • #2
    Go down to "Positioner storage"





    Go down to "Positioner storage"
    Use L/R keys to set the postion number that is to be setup
    Press the GREEN button to store that location
    After you have stored this position got back to satfind and change the satellite to the next one you want to view, when you have a lock on this satellite exit again and proceed with the satellite positioner again .
    You will need to perform this for each position you intend to set up in line with what you did in stage 1
    P.S. i had already put settings in so i did not have to scan any sats in.
    I hope this can help a few others out
    all credit goes to brummie
    for this guide

    For Download
    http://www.2shared.com/document/Yuir34Jn/Setting_up_a_DM800_none_usals.html
    and you can get it from Attachments

    Comment

    Working...
    X