Announcement

Collapse
No announcement yet.

Starview Combo HD

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Starview Combo HD

    [IMG]http://www.********************/starview.jpg[/IMG]

    The Starview Combo HD has the tendency to create "freezing" by itself. We recomment to update to the latest firmware which may make it a bit more stable.
    To prepare the receiver for C@rdSharing please follow the instructions below:
    Press menu / accessory /network.
    If you don't see server press 8989.
    Server -server setup , press ok.
    You should have
    1 off
    2 off
    3off
    Up to
    8 off
    Press ok on 1 off
    Change type to cccam.
    Name or IP address = First part of code.
    Port = part 2 of code (5digits)
    ID = third part of code
    Password = final part of code
    Deskey leave blank. You will probably need to change Type cccam to newcamd delete deskey and change back Type to cccam.
    Press apply.
    Exit out of everything and should be ok.
    On name or IP address do not enter C: just enter what follows after.
    To check status
    Menu/accessory/network/server
    You will have on number 01 cccam ****** ****connect
    If its wrong the same as above but with disconnect

    Admin

    www.AlloCCcam.com


    Note: This tutorial is for EDUCATIONAL PURPOSES
Working...
X