No announcement yet.

conect oscam to oscam

  • Filter
  • Time
  • Show
Clear All
new posts

  • conect oscam to oscam

    he all members cs-allocccam
    how to conect oscam to oscam ?
    using CAMD35 protocol

    You can share between two Oscam servers using camd35 protocol on UDP. This is my preferred protocol. Why? Its the fastest and most reliable. I only use it to transfer local cards from my OScam server to my receivers which are running OScam as client.
    Activate camd35 protocol in oscam.conf on your server and use camd35 reader on your client.
    On the server


    port = 27550 #choose any number here


    user = user1
    pwd = pass1
    group = 1 #here you need to put all your local cards that you have under  oscam.server file. 
    If you do not do this, your other OScam wont be able  to use your local cards! I also assume that every local has its own  group, 
    therefore use multiple numbers here: group=1,2,3,4,5
    au = 1

    Client receiver


    label = box1
    protocol = camd35
    device = ipserver,27550
    user = user1
    password = pass1
    group = 1
    emmcache = 1,3,2
    services = x,x,x,x,x #i strongly suggest that you also use services. In  my experience, 
    camd35 works correctly only after setting services for  different providers!

    Here is my config on client:


    label                         = server_cccam
    protocol                      = cccam
    device                        =,1***
    user                          = ***_vuduo
    password                      = ***_vuduo
    services                      = !mtvunlimited,!hdplus,!tntsat_sd,!tntsat_hd
    group                         = 1
    emmcache                      = 1,3,2
    blockemm-unknown              = 1
    blockemm-u                    = 1
    blockemm-s                    = 1
    blockemm-g                    = 1
    cccversion                    = 2.1.1
    ccckeepalive                  = 1
    audisabled                    = 1
    label                         = server_locals
    protocol                      = camd35
    device                        =,15***
    user                          = ***_locals
    password                      = ***_locals
    services                      = mtvunlimited,cyfra,hdplus,tntsat_sd,tntsat_hd
    group                         = 1
    Why i use !mtvunlimited, !hdplus, etc.? Because i dont want that OScam takes these cards from my CCcam server.
    I want that OScam uses local cards from my OScam server. This config also ensures that cards get regular updates.
    As you probably know, CCcam is not reliable protocol for updating cards (in OScam). With camd35 protocol,
    there usually arent any problems sending EMMs.

    I hope you understand this. If not, do not hesitate to drop a comment here and i will try to help you.