Announcement

Collapse
No announcement yet.

Setting up shoutcast server

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Setting up shoutcast server

    1.jpg



    In the Preferences window, select on DSP/Effect in the Plug-ins section.
    Select the Nullsoft SHOUTcast Source DSP, and click Configure active plug-in:


    2.jpg


    Click on the Encoder tab, select your encoding preferences.

    If you have a fast internet connection, you can select a higher bitrate.
    AAC encoding will give you better quality at the same bitrate as MP3.

    Each user that is connected will require this much bandwidth to listen to your shoutcast stream.
    If you select 96kbps and you have a 256kbps upload, you should be able to stream to 2 users.

    96 x 2 = 192 (roughly the bandwidth required for 2 users)
    256 \ 3 = 85.3 (less than 96)


    3.jpg



    Enter the IP address of your shoutcast server as well as the port and password that you setup in the shoutcast server configuration.
    Click on the "Yellowpages" button to enter a name for your shoutcast server:


    4.jpg


    5.jpg




    Click Connect

    You will see a source connection message in the shoutcast monitor:

    6.jpg

    That's all
    it's simple !!
    ------------------------------------------

    1
    D
    o Not Send Me PM For Support
    .
    2 Do Not Send Me PM For ASK Test.
    3 Ask Your Question On The Forum.

    ------------------------------------------
    My Email is :
    mspauljayo[at]gmail.com
    ------------------------------------------


Working...
X