Announcement

Collapse
No announcement yet.

How to Upgrade Uboot by RS232

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • How to Upgrade Uboot by RS232

    How to Upgrade Uboot by RS232

    Preparation:
    1. Open [HyperTerminal] and set default parameters
    Symbol rate: [1152000]
    Data bits: [8]
    Parity: [None]
    Stop Bits: [1]
    Data Flow Control: [None]
    2. Select [Transfer/File Transfer] Option
    3. Select [u-boot.bin] and use [Ymodem] Option, send file

    Upgrade Step:
    1. Keep Pressing [OK] Button in Front Panel, then power on STB.
    2. After 5 seconds you will see [Forc] in LED, release [OK] button and press [Left]
    Button.
    3. If everything is ok, in STB you will see [LOAD] shinning in LED.

    Enjoy !! Cs-allocccam;com
Working...
X