Announcement

Collapse
No announcement yet.

Upgrade Spark by TFTP

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Upgrade Spark by TFTP

    Upgrade Spark by TFTP


    Since we have some restrictions and can not support all kinds of USB stick, we
    provide another option (TFTP) to upgrade Enigma2/Spark.
    Preparation:
    1. Install TFTP tools [csicotftp11.rar] to your PC
    2. Set your PC IP addr to [192.168.40.19]
    3. connect your PC to STB by LAN, now we only support LAN, do not support WLAN
    4. Set default booting system to [spark]
    Upgrade Step:
    1. copy [mImage] and [userfsub.img] to any folder of your PC, for example [C:/spark]
    3. Keep Pressing [OK] Button in Front Panel, then power on STB.
    4. After 5 seconds you will see [Forc] in LED, release [OK] button and press [Right]
    Button.
    5. if everything OK, You will see [T LD] shining in LED and you will see some debug
    information in TFTP Server, like
    “ Mon Oct 25 14:02:36 2010: Sending ‘mImage’ file to 192.168.40.19 in binary mode
    Mon Oct 25 14:02:39 2010: Successful.
    Mon Oct 25 14:02:50 2010: Sending ‘userfsub.img’ file to 192.168.40.19 in binary
    mode
    Mon Oct 25 14:03:33 2010: Successful.”
    6. if upgrade success, You will see [SUCC] and STB reboot automatically
    If upgrade not finishes in 5 minutes, then there must be something wrong, please
    check your configuration and re-try.


    0c4plvac.jpg
Working...
X