Announcement

Collapse
No announcement yet.

How to upgrade spark image ?

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • How to upgrade spark image ?

    How to upgrade spark image ?


    1, Upgrade image in menu>spark>upgrade software
    Notice: because spark change online server cause system version before 1.2.65 can not login online.

    2,Upgrade image by usb
    Download app zip file for your spark model ;( you can download the image from here : http://www.spark-tv.com/)
    Unzip the zip file then you will have a folder named spark71xx_***_1.2.xx_app and under the folder, you will have 8 zip files and a xml file .
    Copy the app folder (including all the sub folders and files in it) to your USB/hdd stick;
    Connect usb to stb, go to menu>system>upgrade>upgrade from USB ,set the upgrade type on APP and select the xml file of the app folder ,then press RED button start upgrade .(ps :box will automatic reboot after upgrade finish)

    How to upgrade spark image ?

    For those receivers which can NOT boot, spark have following method to recover:
    Preparation:
    1. We only recommend Kingston USB stick; we don't support USB hard disk
    2. Please make sure your USB stick only have 1 partition and the file system is
    FAT32
    3. Set default booting system to [spark], (if you are running spark, then skip this step)

    Upgrade Step:
    1. Make sure spark folder is exist under the root folder of your usb, if not, please create this folder.
    2. Copy [mImage] and [userfsub.img] to [spark]
    3. Connect USB stick to STB;(When upgrade rescue image by USB on Spark7162, please notice that connect USB stick to the rear USB port, otherwise can not find rescue image.)
    4. Keep Pressing [OK] Button in Front Panel, then power on STB.
    5. After 5 seconds, you will see [Forc] in LED, release [OK] button and press [Right] Button.
    6. if everything OK, You will see [U LD] shining in LED
    7. if upgrade success, You will see [SUCC] and STB reboot automatically
    8. If upgrade not finishes in 5 minutes, then there must be something wrong, please
    check your configuration and re-try.

  • #2
    ok thank-u for this info!!

    Comment


    • #3
      Good work keep going......

      Comment

      Working...
      X