No announcement yet.

How to setup Crossepg {XEPGDB providers} on a USB stick

  • Filter
  • Time
  • Show
Clear All
new posts

  • How to setup Crossepg {XEPGDB providers} on a USB stick

    How to setup Crossepg {XEPGDB providers} on a USB stick

    As follows:-

    1} Press Menu on your STB Remote Control and choose SETUP {1}

    2} Then select CrossEPG {2}

    3} Press Configure and in this menu you will setup the location to store the EPG data.
    The best place is on a USB stick, because it is fast. You should see a menu similar to this {3}

    4} Now Press the RED button to save and you will go back to the CrossEPG main menu.
    Next you must Update XEPGDB Providers, the info page will look like this {4}

    5} Now your provider list has been updated, so now select XEPGDB providers {5}

    6} In the XEPGDB providers menu, just select the provider(s) that you want to download,
    the info page will look like this {6}

    7} Now press the Yellow button to download the 3 providers that were selected.
    *On the first generation boxes (Solo, Duo, Uno and Ultimo), it is a good idea to only select 2 or 3 providers as the epg data fills up the memory very quickly*. On the Solo2 you can select all packages without any issues. {7}

    8} Now your EPG is ready to used {8}

    9} To update your EPG data, you can either navigatie into the main CrossEPG menu, and select Download now, or you can Press the Green button @STB Remote Control and use the CrossEPG Downloader. {9}

    9.1} After Pressing CrossEPG Downloader the data will be download, converted and then loaded ready for use automatically. {9.1}

    *** The above guide can also be used for the Rytec EPG packages, just select Rytec instead of XEPGDB and follow the above guide ***

    Thank you


    Last edited by kof; 14-05-2013, 10:18 PM.